 |
|
 |
|
 |
Calibration Block
1 (EN12223)
A steel block for the calibration of ultrasonic
flaw detection and inspection equipment
used in material testing. Used for the calibration
of shear and longitudinal transducers, determination
of shear wave emission point, refracted
angle. Also for measurement of sensitivity
and resolution.
Product Code V1. |
|
Calibration Block
2
(EN27963) For the ultrasonic examination
of welds. To check angle transducers for
beam angle and index point. Available in
12.5mm
and 20mm thickness.
Product Code V2 |
| |
|
|
|
|
 |
|
 |
|
 |
Sonatest Universal
CBU
Calibration Block. For calibration of small
shear wave and longitudinal transducers,
determination of shear wave emission point,
refracted angle and measurement of sensitivity
and depth resolution. 50 mm radius.
Product Code CBU |
|
Steel Step Wedge
1mm to 8mm in 1mm steps. Each step is 20mm
x 20mm. Used for checking the sensitivity
of twin transducers on thin sections when
using a flaw detector.
Product Code VW |
|
Steel Pipe Wedge
Made from 50mm diameter pipe with thickness
steps of 10, 8, 6, 4 and 2mm. This pipe
wedge simulates
steam boiler tubes in power stations and
is used to calibrate flaw detectors for
thin tube inspection.
Product Code PW |
| |
|
|
|
|
 |
|
 |
|
 |
Calibration Step
Wedge
Metric Series of steel discs set into a
perspex block for calibration and linearity
checking of thickness meters and flaw detectors.
Wedge thicknesses 1.5, 2.5, 5.0, 10.0, 15.0,
20.0 mm.
Product Code CBM |
|
Calibration Step
Wedge
Imperial Series of steel discs set into
a perspex block for calibration and linearity
checking of thickness meters and flaw detectors.
Wedge thicknesses 0.05, 0.1, 0.2, 0.3, 0.4,
0.6 in..
Product Code CBI |
|
Velocity Block
Equivalent to a 1μs thickness of a
known velocity in steel. The
block is mounted on perspex.
Used to check the velocity
of other materials with
thickness meters.
Product Code CBV |
