|
Physical |
|
| |
|
| Weight: |
283.495 gms/10 ounces |
|
Size: |
63.5W x 120.7H x 31.8Dmm/2.5W x 4.75H x
1.25Dins. |
|
Operating Temperature: |
-20 to 50oC (-20 to 120oF) |
|
Case: |
Extruded aluminium body / nickel plated
aluminium end caps. Resistant to impact
and environmentally sealed. Built-in steel
reference disk for probe zeroing. |
|
Keypad: |
Sealed membrane that is resistant to both
water and petroleum products. Four tactile-feedback
keys. |
|
Transducer: |
General purpose 5MHz 1/4” (6mm), with integral
4 foot cable. Custom transducers (1MHZ to
10 MHz frequency range) available for special
applications. |
|
Power Source: |
Two 1.5V alkaline AA cells. Typically operates
for 200 hours. |
|
Display: |
Multi-function 4.5 digit liquid crystal
display with 0.500 inch numerals. Selectable
backlight - ON/OFF/Auto (illuminates during
use). |
| |
|
| Measurements
displayed in inches or millimetres. Bar
graph indicates stability of reading. |
| |
|
|
Measurement |
|
| |
|
| Measuring Range: |
0.63 to 199.99 millimetres
(0.025 to 19.999 inches), assuming suitable
material properties. Selectable imperial
or metric units. |
|
Resolution: |
0.01 millimetres (0.001 inch) Four readings
per second for single point measurements. |
|
Velocity Setting: |
The Steelgage II is preset for steel. (5930
m/s / 0.233 in/ms) |
|
Certification: |
Factory calibration traceable to national
standards. |
|
Steelgage II Kit: |
Steelgage II
5 MHz 1/4 inch transducer
125 ml couplant
2 x AA batteries
Carry Case
Manual |
