PHYSICAL:
Weight:
285 g with batteries (10 ounces)
Size:
63.5 W 120.7 H x 31.8 D mm
2.5 W” x 4.75” H x 1.25 D
Operating Temperature:
-30° to 50° C (-20 to 120F )
Case:
Extruded aluminium body with nickel-plated
aluminium end caps. Resistant to impact
and environmentally sealed.
KEYPAD:
Sealed membrane resistant to both water
and petroleum products. Nine tactile-feedback
keys.
TRANSDUCERS:
Single element with delay tip
10 - 22 MHz frequency range
Locking quick disconnect LEMO
connector. 4 foot cable.
Customised transducers for plastics mode
are built with differing acoustic impedance
to plastic. Custom transducers available
for special applications.
CERTIFICATION:
Factory calibration traceable to national
standards
|
POWER SOURCE:
Two 1.5V alkaline or 1.2V NiCad AA cells
Typically operates for 150 hours on alkaline
batteries and 100 hours on NiCad batteries.
Display flashes when battery is low. Unit
turns off automatically when battery
is too low to operate reliably.
DISPLAY:
Multi-function 4.5 digit LCD with 0.500
inch numerals, backlit for use in poor light
conditions
Backlight is selectable: on / off / auto
(illuminates only when taking a measurement
).
Measurements displayed in millimetres and
metres/second or inches and inches/microsecond,
Bar graph to indicate reading stability.
MEASURING:
Overall Range:
Measures from 0.15 to 25.40 mm
(0.0060 to 1.0000 inches).
Switch to select English or metric
units.
Resolution:
0.001 mm (0.0001 inches)
Velocity Range:
1250 to 10,000 m/sec
(0.0492 to 0.3937 in/μs)
|
MEASURING MODES:
Interface to Echo, Echo-to-Echo
(through paint) and Auto –Switchable Four
readings per second for single point measurements
or 8 per second in Scan Mode—captures the
minimum thickness.
Single point calibration
Features:
DIFFERENTIAL MODE
Enter the acceptable thickness value,
unit will display +/- the difference from
the value entered.
ALARM MODE
Enter a minimum acceptable thickness
value. If the measurement falls below
the minimum, a red LED illuminates and an
alert beeper will sound. If measurement
is above the minimum
value a green
LED illuminates.
DATA OUTPUT
RS232 output sends data to a
serial printer, a computer or other external
storage devices.
WARRANTY:
5 year limited
|
