Ultrasonic Specifications Measurement Modes: Coating Off: Pulse-Echo (P-E) Coating On: Pulse-Echo Coating (PECT) Temp Comp: Pulse-Echo Temperature Compensation (PETP) Thru-Paint: Echo-Echo (E-E) Coating Only: Coating (CT) Pulser: Dual square wave pulsers. Receiver: Dual receivers - manual or ACG gain control with 110dB range (limited). Timing: Precision 25 MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizer. Measuring Range: Pulse-Echo Mode (P-E) - (Pit & Flaw Detection) Measures from 0.63 - 508 mm (0.025 - 19.999 ins) Pulse-Echo Coating Mode (PECT) - (Material, Coating, Pit & Flaw Detection) Material: 0.63 - 508 mm (0.025 - 19.999 ins) Coating: 0.01 - 2.54 mm (0.001 - 0.100 ins) Pulse-Echo Temp Comp Mode (PETP) - (Pit & Flaw Detection) Auto temperature compensation, measures: 0.63 - 508 mm (0.025 - 19.999 ins). Echo-Echo Mode (E-E) - (Thru paint and coatings) Measures from 2.54 - 102 mm (0.100 - 4.0 ins) Coating Only Mode (CT) - (Coating Thickness) Measures from 0.0127 - 2.54 mm (0.0005 - 0.100 ins) Range will vary +/- depending on the coating. Resolution: +/- 0.01 mm (0.001 inches) Velocity Range:1250 to 13995 metres/sec 0.0492 to 0.5510 ins/ms Single or two point calibration option for material and coating, or selection of basic material types. Units: English or Metric Certification: Factory calibration traceable to national standards. Warranty: 2 year limited. | Physical: Size: 63.5mm(W) x 165mm(H) x 31.5mm(D) 2.5in(W) x 6.5in(H) x 1.24in(D) Weight: 382.72 gm's (13.5 ounces) with batteries Keyboard: Membrane switch pad with twelve tactile keys. Operating Temperature: -10oC to 60oC Data Output: Bi-directional RS232 serial port. Windows PC interface software. Display: 1/8 in VGA greyscale display (240 x 160 pixels). Viewable area 62 x 45.7 mm (2.4 x 1.8 ins) EL backlit (on/off/auto) Power Source: Three 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline. Auto power off if idle for 5 minutes. Battery status icon. Display: Large Digits: Standard thickness view. Digit height 17.78mm (0.700 ins) B-Scan: Time based cross section view. Display speed of 15 sec's per screen. Scan Bar Thickness: 6 readings per second. Viewable in B-Scan and Large Digits views. Repeatability Bar Graph: Indicates stability of reading. Features Status Bar: Indicates features currently active. Transducer: Transducer Types: General purpose 5MHz 1/4” (6mm), with integral 4 foot cable. Custom transducers (1MHz to 10MHz frequency range) and cables available for special applications. Data Logger (CT-DL) Log Formats: Grid (alpha-numeric), Sequential (auto-identifier) Graphics On: 16,000 readings, B-Scan image & gauge settings for every reading. Graphics Off: 210,000 readings (coating, material, min & max) OBSTRUCT to indicate inaccessible locations. |
