Search
United Kingdom +44 (0)1908 316345
United States +1 (210) 697 0335
sales@sonatest.com

ZETEC MIZ-21SR


Overview Specifications  
Case
- Dimensions: 11 L x 5 W x 2.5 D
inches (28 x 13 x 6 cm)
- Weight: 3.9 lb (1.7 kg)

Power

- Batteries: internal, rechargeable,
memory-free long-life nickel metal
hydride (NiMH)
- 12-hr operation without
additional accessories; more than
9 hours with backlight on
- On-screen message area for low
battery and signal saturation
- Less than 2.5-hr quick charge
- Universal charger power input:
85-264 VAC / 47-63 Hz
- Optional external 12 VDC alkaline
battery power pack

LCD Display with Backlight

- 240 x 320 pixels
- 2.25 x 4.50 inches (5.7 x 11.4 cm)
- Fast-responding, high-contrast
- Wide viewing angle (60°)
- Extended temperature range
maintains clear visibility and speed
at temperatures below freezing
- Backlight with long-life LED
- Operates in total darkness
- Maintains full contrast in brightest
sunlight
- High-strength polycarbonate
window with scratch-resistant
coating

Inputs/Outputs

- Remote Connector (serial port) for
PC interface, supports:
- Printing via Hewlett-Packard,
Epson emulation, or Seiko
DPU-414 Type II thermal printer
- Screen capture to PC
- Store or recall test configurations
to PC
- Software revision updates
- Selectable horizontal and
vertical analogue outputs
- Probe Connector – auto-switches
to interface with all standard probe
configurations
- Battery Connector – charging and
external power

Environmental

- Operating temperature range:
14° to 131°F (-10° to 55°C)
- Storage temperature range:
0° to 140°F (-17.7° to 60°C)
- Humidity: 0 to 100% noncondensing
Certification
- MIL-STD-810
- CE Mark
- ISO 9001
Flaw Detection
- Programmable analogue drive and
gain stages
- Noise-suppressing synchronous
demodulation circuitry
- 16-bit A/D converter
- High-gain analogue circuitry

Display Modes

- XY Impedance Plane
- Bar Graph
- Triggered Sweep
- Auto Sweep Slow
- Auto Sweep Fast
- C-scan (Plotted Waterfall)
- Screen data clearing is manual
(CLR button) or automatic
(variable persist mode)
- 2-signal display can show two
signals side-by-side in sweep
and XY modes

Scanner Support

- Supports HS Scanners
- Support for other manufacturers’
scanners is available, consult
ZETEC for details

Memory

Non-volatile (data retained with
power off):
- Stores 50 test configurations
- Stores 10 screen images for
review or comparison
- 8-second buffer memory:
adjustable cursor scrolls
through entire data buffer to
select a range of data points
for more in-depth review
- Stores up to 10 reference points

Conductivity Testing/Metal Sorting

- Conductivity and coating thickness
measurement at 4 frequencies:
60, 120, 240 and 480 kHz
- Digital readout in 1 to 102 %IACS
(0.5 to 70 MS/m)
- Meets BAC 5651 requirements

Auto set Phase/Auto set Gain

- Quickly and automatically set values
for probe drive, gain, scale, and
rotation. Auto set Phase sets the
rotation so that the lift-off signal
deflects horizontally to the left
from the reference signal.

Frequency

- 50 Hz to 8 MHz
- 2 independent frequency selections
to support dual frequency testing

Phase

- Manually adjustable in one- and
ten-degree steps from 0° to 359°
Gain Adjustment Range
- Vertical and horizontal scale
independently adjustable from
1 to 99

Probe Drive

- Adjustable to six output drive levels
- 50-ohm probe drive (industry
standard) provides optimum
balance between probe input and
instrument output

Filters

- Adjustable high-pass, low-pass,
and band pass filters
- On-screen numeric read-out of
cut-off frequency

Alarms

- Audio alarm with adjustable volume
- Visual LED alarm
- Alarm area is shown on the display;
alarm box size and positioning are
independently adjustable
- Alarms can be set for all display
modes, as well as for conductivity
limits
- In XY, YT, and Bar Graph display
modes, alarm can trigger either
inside or outside of the gated area
- TTL, visual, and adjustable audio
output alarms are provided
- Headphone outputs

Probe Configuration

Internally switches to interface with
all standard probe configurations
- Single
- Differential (selectable internal
or external balance load for
single-coil operation)
- Reflection (Driver-Pickup)
- Differential Driver-Pickup
 
Get a competitive quotation

Get a competitive quotation
(price) on this product from
Sonatest or one of our many
authorized distributors.
 
Request more information about this product. This may be technical queries, applications that this product is used in or any other information you require related to this product.

Request more information about
this product. This may be
technical queries, applications
that this product is used in or
any other information you
require related to this product.
 
View a brochure on this product.

View a brochure on this product.
News
News Feed Bookmark and Share
Copyright 2010 Sonatest Limited | Shipping and Returns | Disclaimer | Privacy and Data Protection Policy | Site Map