|
Now you see it!
Sonatest
launch the veo Phased Array flaw detector
 As
a result of Sonatest’s drive to bring desirable and
innovative products to the NDT market, a new Phased
Array instrument is now launched, the veo 16:64. The
veo is a fully capable Phased Array instrument with
multi-technique functionality, including TOFD; fast
data recording, a simple to use interface and rugged
housing design renders the veo a performance leader
from the beginning. Combine this with Sonatest’s
outstanding commitment to customer support and
product service; the user experience is a winning
one. Typical applications include Pipeline Weld
Inspection, Corrosion Mapping, Aerospace and
Composite Testing.
Key design elements considered in the development of
the veo series are user and performance focussed
which include simple controls and a workflow driven
Menu structure. The 3D Scanplan feature displays a
full 3D view of the user’s test set up including
probes, wedges, the weld and geometry, with phased
array beams. There are also on-board probe and wedge
databases for fast setups.
Power & Performance
perfectly packaged.
This 16:64 Phased Array instrument has TCG and ACG,
a superior encoding speed with fast A-scan recording
and excellent reporting functionality. There are two
separate conventional channels providing
simultaneous Phased Array and TOFD scanning to speed
inspection and ensure correct data referencing for
improved defect characterisation. Real Time Focal
Law calculations allow the user to change scanning
parameters instantly, reducing the time spent on
setup and defect investigation.
The veo enclosure has been designed to withstand the
tough environments in which NDT inspections are
carried out, achieving IP67 standard for water and
dust ingress and employing internal shock mounts to
withstand impacts. The market sectors largest
sunlight readable screen, enables the technician to
see and interpret results with ease and efficiency,
especially when complex inspections need multiple
probe configurations. The veo batteries give up to 6
hours use, and are hot swappable for continuous use.
Wayne Woodhead, Managing Director of Sonatest Ltd
“Phased Array is an exciting technology that is
becoming regarded as the future of Non Destructive
Testing for critical inspections and productivity
improvement. The new veo brings Sonatest’s design
values of Simplicity, Capability and Reliability
into this rapidly expanding market, giving users an
effective, efficient tool to meet their demanding
needs. The veo builds on Sonatest’s success in the
ultrasonic flaw detector market, with a global sales
network supporting our customers throughout the
world. Launched at the European Conference for NDT
(ECNDT) in Moscow June 2010, initial reaction has
been very positive and we are looking forward to a
very successful future.”
Sonatest will be at various exhibitions over the
next months with the veo, including the UK NDT 2010
show between September 14-16th and the ASNT Fall
Conference in the USA, Houston, between November
15-19th. For further and dedicated information on
the new Sonatest veo please visit
www.sonatestveo.com
July 2010
Sonatest Reinvents the Wheel - so that you
don't have to
Sonatest are proud to launch the new Radius
WheelProbe, which has been specifically designed for curved surface
mapping applications, often found in the Aerospace and Composite
sectors. Continuing the proven success of Sonatest’s
WheelProbe range, this new model is proving to be unrivalled in the
field of ultrasonic structure mapping in terms of signal quality,
speed and ease of use Composite and Metallic testing.
Application subjects include areas such as Aircraft Wing Leading
Edge, Aircraft Horizontal Tail Piece, Engine Cowlings, Aircraft
Radome, Helicopter and Fuselage components. Additional
Composite applications are Yacht Mast Testing and Marine Hulls, Wind
Turbine Blades and Automotive Composites amongst others.
 Ergonomically
designed, the Radius Wheel Probe offers smooth handling, good
control with comfortable grip positions for scanning around curved
surfaces, and improved performance in overhead working environments. Circumferential and Longitudinal scanning are
both completed rapidly and can be performed on curved surfaces with
diameters as little as 4 inches. Fast and easy configuration for
different diameters is adjustable in the field thanks to the Surface
Curvature Scale, on the WheelProbe™, enabling quick adjustments and
fine tuning.
The
Radius WheelProbe™ is not only compatible with NDT Systems and
instruments available from the Sonatest Ltd range, such as the
Rapidscan Series, but also with a wide range of industry standard
Ultrasonic Array based instruments, making this instrument one of
the most flexible and result-driven pieces of testing equipment that
can currently be invested in.
The industry sectors where the Radius Wheelprobe™ can be used
include Aerospace, Composite Manufacturing, Marine and Shipping,
Petrochemical and Power Generation.
|
